SIE VAC® Vacuum Recovery

The all new super silenced SIEVAC range is a high efficiency pneumatic conveying machine designed for high tonnage vacuum recovery and reclamation of particulate materials.

With the capacity to recover up to 20 tonne per hour depending on material and being a single compact highly robust and mobile unit designed for the most arduous environments the SIEVAC has been exceeding all expectations. SIEVAC has the ability to recover blast media up to a mile

Noise levels are not a problem the all new SIEVAC operates at 70dba surpassing all regulations and when your demands take you in proximity of the local population it causes minimum disturbance.

SIEVAC offers you the right solution to recovering and conveying blast Medias such as, Abrasive blasting material, Powders, Plastic pellets, Grains, Sands, Aggregates and numerous other bulk materials in both clean up and material transfer functions.

SIEVAC is routinely deployed to blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, powder plants, cement industries, chemical industries and beyond.

The SIE VAC is a compact single unit robustly constructed to withstand hard usage in industrial environments and has many important features including:

Automatic discharge of the material at set timed intervals whilst recovery takes place allowing non-stop production.

Automatic reverse pulsing of the filters to maintain efficiency.

Low noise levels in operation.

Extensive lining of parts subject to abrasion so wear is reduced to a minimum resulting in reduced down time.

Simple maintenance procedures with all components of the unit easily accessible.

Designed for continual operation, as a self cleaning continual off loading system or for use to a collection hopper.

Depending on customer specifications performance of our SIEVAC range may vary, the minimum you can expect is 7.5 metric ton per hour rising up to 20 metric ton per hour at distances reaching over 1 mile, proven at the Tay Bridge in Scotland. When all these factors are considered, the recovery system investment is rapidly refunded.



Vacuum Recovery HoggaJet and Jetpump compact

HoggaJet Grit Recovery System

The HoggaJet and Jetpump compact air operated recovery system has been tried and tested over many years in arduous situations and found to an be efficient, and cost effective machine for the recovery of particulate materials.

Incorporating the Jet pump as the prime mover, it can produce 14” Hg of vacuum when connected to an air supply of 250 cfm at 80-100 psi. At these levels 5-6 tonne per hour of recovery can be obtained.

The system will recover solids in excess of 100 metres, dependent on particle size, type of material, volume and pressure of air supply. The HoggaJet only has one moving part, and with no electrical power required there is no risk in ATEX conditions.

Method of Operation

All material is recovered through the gulper suction head and is drawn via the rubber lined hose into the cyclone. The vortex separates the fine dusts from the heavier materials which fall under gravity into the hopper for re-use. Any remaining dust travels along the flexible hose to the filter box. Inside the filter box 18 filter socks collect the dust as the airstream passes through. Clean air is discharged through the JetPump and silencer to the surrounding atmosphere. The filter socks are cleaned each time the machine stops by reverse pulsing.

Technical Specification:

Power Source:- Compressed Air – 250 cfm at 100 psi

Suction Hose:- 2 ½ inch (max 4“)

Recovery Rate:- Up to 5-6 tons / hour

Dimensions:- Filter Box 79” x 53” x 52”

Hopper / Cyclone:- 86” overall height x 43” x 37”

Weight:- 540 kg

Filtration:- Cyclone and 18 Filter Socks

Noise Level:- 83 dba at 2m

Available for sale and hire at SIE Industrial.

You may also be interested in our jet pump for low cost vacuum recovery.

JetPump Grit Recovery

The Jet Pump is a vacuum recovery unit designed for the removal and transport of used abrasive media.

Description

The Jet Pump is capable of handling material sizes up to 10 mm in diameter, with a transfer rate of up to 3 tons per hour depending on air supply and media. Its compact design allows media recovery in difficult to access areas.

Maximum solids handling capacity is obtained using our unique aerofoil lift action and direct through-flow design.

The replaceable liner ensures that most abrasive materials can be handled without encountering the wear problems of more complicated machines.

It requires only an air supply to operate and comes with inlet and discharge hoses.

Features

Power Requirements - 250 CFM at 80 PSI minimum
Weight - 32kg
Effective - Recovers Loose Solids Up To 10 mm over distances up to 30m
Safe - No Moving Parts
Economical - Low Capital And Maintenance Costs
Simple - Easy to operate
£2000